合成材料塑胶跑道面层的产品及施工要求：
Product and Construction Requirements of Composite Plastic Runway Surface Layer:
1、塑胶田径跑道采用的橡胶材料要求，持有国家体育总局体育设施标准管理办公室颁发的《塑胶跑道合格证书》的产品。
1. The rubber material requirement for the plastic track and field runway shall be the product of the Plastic Runway Qualification Certificate issued by the Sports Facilities Standard Management Office of the State Administration of Sports.
2、塑胶田径跑道施工采用现浇热施工，要求与沥青跑道基层粘连牢靠。
2. Plastic track and field runway construction adopts cast-in-place hot construction, which requires strong adhesion with asphalt base.
3、塑胶田径跑道施工厚度，田径跑道区域为13mm厚，跳高、跳远加厚区域为18mm厚、3000米障碍池前、后加厚区域为18mm，非赛区域为9mm厚。
3. The construction thickness of the plastic track and field runway is 13 mm thick, the thickening area of the high jump and long jump is 18 mm thick, the thickening area of the obstacle pool before and after 3000 meters is 18 mm, and the non-competition area is 9 mm thick.
塑胶跑道基层-塑胶跑道基础施工方案：
Plastic runway base-plastic runway foundation construction scheme:
施工流程：基础开挖平整、夯实→12%灰土300mm厚→SBS防水层，接缝烫粘→150mm厚C25混凝土层→13mm混合型塑胶面层
Construction process: foundation excavation leveling, compaction 12% lime soil 300 mm thick SBS waterproof layer, seam bonding 150 mm thick C25 concrete layer 13 mm mixed plastic surface layer