塑胶地面基层处理：把沾在基层上的浮浆、落地灰等用錾子或钢丝刷清理掉，再用扫帚将浮土清理干净，用自流平水泥将地面找平，养护至达到强度要求，清水冲洗，不允许残留白灰。胶地面弹线：将房间依照塑料板的尺寸，排出塑料板的放置位置，并在地面弹出十字控制线和分格线，可直角铺板，也可弹45°或60°斜角铺板线。
Base treatment of plastic floor: Clean up the floating slurry and landing ash on the base with chips or wire brushes, then clean up the floating soil with broom, leveling the ground with self-leveling cement, maintain to meet the strength requirements, rinse with clean water, and do not allow residual white ash. Rubber floor elastic line: according to the size of the plastic board, the room will be discharged from the placing position of the plastic board, and on the ground pop-up cross control line and grid line, can be right-angle plywood, can also play 45 degrees or 60 degrees inclined plywood line.